Home › Standards › GB 50217-2018 › 第5.1.3条

GB 50217-2018 第5.1.3条 Standard for Design of Cables in Power Engineering

Cable laying电气工程

GB 50217-2018 第5.1.3条

| Cable laying shall meet the allowable bending radius requirements. For XLPE-insulated cables commonly used in hotels, the minimum bending radius is typically 12 times the cable outer diameter (multicore) or 15 times (single-core); this must be strictly controlled during construction to avoid damaging the insulation.

Other clauses of this standard

GB 50217-2018 第1.0.1条Standard for Design of Cables in Power Engineering
GB 50217-2018 第1.0.2条Standard for Design of Cables in Power Engineering
GB 50217-2018 第1.0.3条Standard for Design of Cables in Power Engineering
GB 50217-2018 第1.0.4条Standard for Design of Cables in Power Engineering
GB 50217-2018 第第1.0.1条条Standard for Cable Design of Electric Power Engineering
GB 50217-2018 第第1.0.2条条Standard for Design of Cables in Power Engineering
GB 50217-2018 第第1.0.3条条Standard for Design of Cables in Power Engineering
GB 50217-2018 第第1.0.4条条Standard for Design of Cables in Power Engineering
GB 50217-2018 第2.0.1条Standard for Design of Cables in Power Engineering
GB 50217-2018 第2.0.2条Standard for Design of Cables in Power Engineering
GB 50217-2018 第2.0.3条Standard for Design of Cables in Power Engineering
GB 50217-2018 第2.0.4条Standard for Design of Cables in Power Engineering

Still have a specific question? Ask a MEP expert

12 hotel MEP experts online, answers cite standard clauses you can verify.

Ask free →

Engineering reference only — verify against project conditions and the latest codes.