Home › Standards › GB 50217-2018 › 第3.2.2条

GB 50217-2018 第3.2.2条 Standard for Cable Design of Electric Power Engineering

Cable cross-section电气工程

GB 50217-2018 第3.2.2条

| **** | The ampacity of continuously operating circuit cables shall be corrected according to the installation environment (in air, in cable tray, in conduit embedded in wall, etc.) and the temperature correction factor. In hotel ceiling voids and pipe shafts, heat dissipation conditions are poor, so verification must be emphasized. |

Other clauses of this standard

GB 50217-2018 第1.0.1条Standard for Design of Cables in Power Engineering
GB 50217-2018 第1.0.2条Standard for Design of Cables in Power Engineering
GB 50217-2018 第1.0.3条Standard for Design of Cables in Power Engineering
GB 50217-2018 第1.0.4条Standard for Design of Cables in Power Engineering
GB 50217-2018 第第1.0.1条条Standard for Cable Design of Electric Power Engineering
GB 50217-2018 第第1.0.2条条Standard for Design of Cables in Power Engineering
GB 50217-2018 第第1.0.3条条Standard for Design of Cables in Power Engineering
GB 50217-2018 第第1.0.4条条Standard for Design of Cables in Power Engineering
GB 50217-2018 第2.0.1条Standard for Design of Cables in Power Engineering
GB 50217-2018 第2.0.2条Standard for Design of Cables in Power Engineering
GB 50217-2018 第2.0.3条Standard for Design of Cables in Power Engineering
GB 50217-2018 第2.0.4条Standard for Design of Cables in Power Engineering

Still have a specific question? Ask a MEP expert

12 hotel MEP experts online, answers cite standard clauses you can verify.

Ask free →

Engineering reference only — verify against project conditions and the latest codes.